hey love the new timetable editor (only recently was able to play it), though one thing i was curious on was if there will ever be support to have different trains run at different times (example: suburban down 10:00 being a class 117 whilst the 15:00 is a 112)
I thought about adding support for different formations in the same template but it turned out to be a bit complicated so had to drop the idea. If I figure out how to make it work in the future I'll certainly do it. For now you'll just have to create separate templates for different formations.
Yes, the latest version (1.30) has a timetable editor which you can use to create your own traffic to the existing routes. The editor can be started from the top of the service selection screen. The next update (1.40) is to include a route editor.
Congratulation!!The simulator is terrific! Really beautiful and realistic .. it feels like to be in the cabin.. the sensation of leaping from the driver chair. I wanted to ask if it will be possible to derail in the future .. I think it's more exciting to know you can get out of the tracks in case of excess speed. :)
Thank you Donstover! Yes, I guess it would be a good idea to implement actual derailments. It would add to the realism and make the sim more credible, knowing that there are consequences (other than just losing points) for breaking the rules.
It's been there from day one :) You'll just have to overrun a trailing point set against you and then reverse, and the front of the train will go to the other track.
I was playing DRS a few days ago when I thought about something. The maximum speed limit on both mainlines is actually 90mph however at this speed your target speed is always 70mph . I think that the target speed should be based on what the actual line speed limit is rather than on how fast the train can go since the train can overexceed its maximum speed.
I respectfully disagree :) In real-life you can exceed the line speed limit at the risk of derailing or damaging equipment. You can also exceed the train's designated maximum speed at the risk of derailing or damaging the train. You shouldn't do either though. In the case of the 1st gen DMUs the max safe speed is probably limited by the power train, but for safety reasons, many other trains have lower max speeds than what they could actually reach.
When you say improving existing routes can you get rid of all of these entry portals and exit portals and replace them with terminus stations. having portals is a bit unrealistic.
In real world the continuous railway network is a large complex web that can't all be modelled as one route so you'll end up with some branches and stubs that lead to unmodelled parts of the network. These are often modelled as portals of some kind in the other train sims as well. Then again the current routes are fictitious so the portals could be replaced with terminus stations to form a small-ish but complete railway network. Another option would be to have the run start and end at a non-terminus station instead of a portal.
I'm probably not going to make any more routes but I'm going to improve the existing ones. Hopefully people will use the editors to create new routes but if that doesn't happen then I'll look into making some more (real-world ones).
While playing DRS I realised that it would be great to have a fully accesible cab. What I mean by that is maybe if you could control the train's wipers and if the trains had destination blinds showing where the train was going. Also, it would be great if the trains had lights at each end and that these could be controlled from the cab.
That's true yes, these features would be nice and I'll try to fit them in at some point, but they're relatively minor details compared to some of the other missing stuff so they're not yet a high priority.
In version 1.3 you said something about adding new dmus and a loco plus carriages. What classes will these new trains be? And when will version 1.3 be released?
There's a more up-to-date plan over at the Steam discussions forum (no account required for reading). The locos will be 03 and/or 08 and/or 37 with Mk1 coaches and/or freight wagons but I'm going to release two editor updates before that. Developing the editors is taking a lot longer than I originally expected because they're technically quite complex. I shouldn't really give any dates because I've done such a poor job of estimating them in the past, but the next update is quite likely to be released next month.
In reality there weren't advance warning boards for the speed limits in 1960's UK so I'm leaving them out. For more modern routes there will be advance warnings
I've watched a couple of videos of Trainz, Open Rails and Run8 multiplayer. The problem is that they don't seem very fun. Train Simulator 20xx is still the most popular train sim even if it doesn't have multiplayer.
Yes an update is probably going to be released next week, but it's a small one with some bugfixes and optimisations. The route editor is still not ready.
Thanks! I'll need to revisit the scenery loading mechanism and release another beta. The performance issues in general are something I didn't expect or really notice on my own laptop, but I'll go again through the changes I did to see if there's anything obvious there that might have an impact.
Yes, you'll be able to load, edit and save again any route. If people want it, I can consider doing some kind of protection so that you can distribute a route you've done without letting others make changes to it.
Diesel Railcar Simulator is the first train sim I have purchased since way back when MS train simulator came out and this is far more enjoyable. Until this came out the available train sims on the market have had very mixed ratings but this sim is fantastic. I know you mentioned that the sim currently focused on Diesel mechanical / hydraulic for time being and that's fine (class 35 or 43 or 52 locomotives maybe?). But it would great if you managed to get diesel electric supported for this sim, it could allow DEMU class 205s for instance. Also, if diesel electric were supported, would physics support for purely electric locos (apart from track infrastructure) really be that much more work given that both are driven by traction motors?
Thanks Jakkson! Diesel-electric support will be coming eventually as soon as I get some other stuff out of the way first (the editors for instance). I'll need to research how it works in detail to model it to the same fidelity as the mechanical and hydraulic transmissions. The train editor will allow the community to add the classes you mentioned while I focus on developing the core sim.
It's true that the diesel-electrics share a lot of similarities with purely electric locos but I don't yet know to what extent. There might be some differences in the control mechanisms. The infrastructure is also a major point, not just in the 3D-modelling of the power rails or overhead electric lines, but because of how multiple electric trains drawing current from the same transformer affect each other's performance, unlike steam or diesel locos which are independent of each other.
Multiplayer is probably quite difficult to do so that it works reliably, is fun and doesn't suffer from abusive players, so I'm going to leave it out unless I figure out a way to solve all the problems easily.
Personally I quite like the idea of starting some services with a delay; kind of "do you best to recover time" challenge mission that adds a random element to the simulation; so I don't see them as a bug or issue.
That's true and I agree but there are some services which can't be run to time under any circumstances. The randomisation will always result in starting late or being held at a signal so long that you'll always be late at the last stop. I'm going to make sure all services can finished in time at least sometimes.
Would it be possible in one of your updates to add traffic on the roads? Like cars , trucks and buses etc. The towns and roads seem a bit empty without anything moving about.
I can only promise that I'll try to do very easy to use route and train editors for the community. There are many players from France so I hope some of them will try making real French routes and trains.
At first, the bare minimum to be able to make routes similar to the ones currently in the sim: track laying, semaphore signals, distants, AWS magnets, stopping areas/markers, scenery features, timetable creation... I'll be adding more advanced features in later updates!
This is by a mile the most realistic of all the train sims. In regards, physics, sounds both dmu and rail sounds. Plus operation of the units themselves. I was a shed fitter on BR WR, mostly dmu's but also all the hydraulic classes from joining in the late 1960's. It doesn't get any better than this and i look forward to future development. Particularly in regards the editors, both route and scenario creation.
Charlie, thank you for the very generous tip! If you have any stories or comments to share in regards to the performance or operation of the units I'm all ears! I know that the brakes in the simulator are probably underpowered at low speeds because the behaviour of the cast-iron brake blocks is not simulated quite correctly.
Updates will definitely be continued barring any force majeure! The progress might be a bit slow because of the genuine complexity of all the stuff involved.
Thanks IKB, the route editor is currently in the works and I'm excited to see what people can do with it once it's ready! I'd be interested in any knowledge that could be used for improving the realism of the simulator, based on your experience working with the DMUs!
Just a reminder: if you buy/bought the sim from here, you don't need to buy it again on Steam. Just log in and go to the download page, then click the "Get Steam key" button.
if a price of something differs by more than 10℅ by currency or region the sale is blocked to gift. Along with stopping people buying things and putting in thier inventory.. I gather its more against the grey area market of cheaper country pricing sold for profit elsewhere.. But its really stopped me gifting games to good friends overseas..
Hi Overland, if you purchase the game here you get one Steam key. I'm not sure if the key is affected by the regional changes (what changes are those?)
This game is awesome, I hope that will be able to have a steam key on march 5th :) I will make a presentation on my youtube channel for my french community. Congrat !
Thank you! I just added a batch of Steam keys to the system. You can get yours by going to the download page and clicking "Get Steam key". The key can be activated already but the download on Steam won't work until the official release on Monday.
Excellent, the steam release will be the same as this one ? Just a few notes after playing with your game : In some trains the speed gauge is not accurate. Then, we have to use the speed helper (ui at the right) to get our real speed. On the route schema on the right it's difficult to evaluate distance and size of station too. Awesome game I hope we could see passengers go up and down the train :)
Thanks for the notes! Yeah, the speedometers can be somewhat inaccurate but luckily the speed they show is usually a bit more than the actual speed, so you won't overspeed if you follow them. The route schema is that way by design so it wouldn't make things too easy. You should only use it to get an idea what is coming next and then look out of the window! :) Moving passengers are planned for one of the later updates.
Please post a link to your video here or to the Steam community if you can, I'd love to watch the video once it's ready!
No problem! It'll be useful to all French-speaking users. Everything doesn't have to be in English, there's already one video in German in the Steam community hub. Besides, I can understand French to some extent :)
Firstly I see DRS appearing on my 'coming soon' list on Steam - woot!
Secondly - is there any way to see a map of the world that DRS is set-in? I like to have an idea of where I am/going - even if it's just a JPG - just so I can see where everything is in relation to everywhere else??
Also loving the new shader/style - tho it's had a bit of an effect on performance - new PC looms I guess!!
Yes, DRS is finally coming to Steam! I'll arrange the keys for itch owners after the official release.
The new version has a map button at the bottom of the service selection screen, did you notice? It's easy to miss though! There's no map during the actual run yet, this is planned for the next update.
Motion blur is perhaps the single most demanding graphical effect. Does it help if you turn that off? You might also get better performance by using the second best quality option, but still enabling some of the additional effects, rather than using the best quality and disabling some effects. The sim is nowhere near fully optimised yet so hopefully you don't need to get any new hardware!
Maps found - MUCH happier when I know where I'm going!!
One small issue - the 'tutorial' function which suggests what to press seems to be less useful than it was in earlier releases? I'd disabled it for areas I was comfortable driving but I ran a scenario today which ended in a terminus and following the on-screen instructions led me to crash into the buffers!
It also gets confused in some stations - you stop and it keeps suggesting you apply/release the brakes over and over?
I'm ALMOST grown-out of it but I imagine new players may be confused?
The key tutorial is the same as in the earlier version. It does occasionally instruct you to accelerate right before a terminus buffer stop so there's still room for improvement! For a funny example of this, see GrayStillPlays' Let's play video (he's playing version 1.0). The reason why the tutorial suggests fiddling with the brake at stations is because it's trying to match 15 inches of vacuum which is the standard for keeping the train still. The vacuum gauge works with some delay, especially in longer trains, which is why you see the needle dropping occasionally below 15in even though the brake valve is lapped. You're right though, it's confusing for a beginner and I'm still going to fine tune it in some of the future updates!
It's super-useful to have that guide - esp as the game has the 'score' aspect for best driving practices!!
It also maybe distracts people a BIT from learning trains properly - I had to force myself to turn-it-off - I believe remapping is possible so maybe I need to remap to TS settings to avoid having to think so hard? :)
Hey, congratulations for the launch of version 1.2, great improvements on atmosphere and sounds (they make it even more immersive now).
I saw your post regarding the graphical effects on performance and wanted to add this from my findings: with "Good quality" preset and "Reflections" turned "off" I get fireflies on the edges of the passenger seats, sometimes with flashing white squares around them. Same effect is visible from the helicopter cameras and also on the incoming trains (from the opposite direction). Frame rate tanks a bit when I rotate my camera to look at them specifically (60 to 40-30). I'm attaching an image in case my description is lacking.
I know you mentioned you haven't optimised it yet, hoping this will be of some aid when you get there. All the best ! :D
Thanks! I've sometimes noticed the fireflys on my own machine as well, but not recently, so I thought the issue had somehow resolved itself, but apparently not. It's probably the bloom effect? There might some very small or degenerate triangles in the places where the fireflys occur, will need to investigate and come up with a fix to the next update.
Did a test with "Bloom" setting "Off" and the artefacts are still there for me, maybe there are some inverted normals or overlaps in the mesh. LE: They go away if I turn High Dynamic Range "Off" when having Reflections disabled.
Thanks, I tried the same and indeed, it's not the bloom. They also go away if I enable TAA or disable AO, so it must be a combination of the post effects and how they handle triangle or normal vector edge cases.
← Return to game
Comments
Log in with itch.io to leave a comment.
hey love the new timetable editor (only recently was able to play it), though one thing i was curious on was if there will ever be support to have different trains run at different times (example: suburban down 10:00 being a class 117 whilst the 15:00 is a 112)
I thought about adding support for different formations in the same template but it turned out to be a bit complicated so had to drop the idea. If I figure out how to make it work in the future I'll certainly do it. For now you'll just have to create separate templates for different formations.
bonjour pouvez vous rajouter l eclairage sur les autorails?
Yes, headlights, signal lamps and other lighting will be added in one of the future updates, though not in the next one. Maybe in the one after that.
Is it possible to create mods for the game at all?
Yes, the latest version (1.30) has a timetable editor which you can use to create your own traffic to the existing routes. The editor can be started from the top of the service selection screen. The next update (1.40) is to include a route editor.
Congratulation!!The simulator is terrific! Really beautiful and realistic .. it feels like to be in the cabin.. the sensation of leaping from the driver chair. I wanted to ask if it will be possible to derail in the future .. I think it's more exciting to know you can get out of the tracks in case of excess speed. :)
Thank you Donstover! Yes, I guess it would be a good idea to implement actual derailments. It would add to the realism and make the sim more credible, knowing that there are consequences (other than just losing points) for breaking the rules.
Now @Lapioware Ive had this game for a cuple of mounths But Theres one issue WHERES THE MULTI TRACK DRIFTING????
It's been there from day one :) You'll just have to overrun a trailing point set against you and then reverse, and the front of the train will go to the other track.
This Game Has switches?
Switch (Am.) = Point (Br.) :)
So when you come to a turnout to join another track but the switch is set to the other track, you can use this to split your train onto two tracks.
I dont Remeber Switches AKA Trailing Points
I was playing DRS a few days ago when I thought about something. The maximum speed limit on both mainlines is actually 90mph however at this speed your target speed is always 70mph . I think that the target speed should be based on what the actual line speed limit is rather than on how fast the train can go since the train can overexceed its maximum speed.
I respectfully disagree :) In real-life you can exceed the line speed limit at the risk of derailing or damaging equipment. You can also exceed the train's designated maximum speed at the risk of derailing or damaging the train. You shouldn't do either though. In the case of the 1st gen DMUs the max safe speed is probably limited by the power train, but for safety reasons, many other trains have lower max speeds than what they could actually reach.
Spot on Oskari, line speed is irrelevant. The safe max operating speed is always the first consideration.
When you say improving existing routes can you get rid of all of these entry portals and exit portals and replace them with terminus stations. having portals is a bit unrealistic.
In real world the continuous railway network is a large complex web that can't all be modelled as one route so you'll end up with some branches and stubs that lead to unmodelled parts of the network. These are often modelled as portals of some kind in the other train sims as well. Then again the current routes are fictitious so the portals could be replaced with terminus stations to form a small-ish but complete railway network. Another option would be to have the run start and end at a non-terminus station instead of a portal.
Is there going to be a third full route?
I'm probably not going to make any more routes but I'm going to improve the existing ones. Hopefully people will use the editors to create new routes but if that doesn't happen then I'll look into making some more (real-world ones).
bonjour peux tu integrer un controle manette complet ou partiel stp
I think you've already asked this :) Yes, there will be full controller support later. In the meantime you can use an external program to configure a joystick for the sim as described here: https://steamcommunity.com/sharedfiles/filedetails/?id=1347790178
While playing DRS I realised that it would be great to have a fully accesible cab. What I mean by that is maybe if you could control the train's wipers and if the trains had destination blinds showing where the train was going. Also, it would be great if the trains had lights at each end and that these could be controlled from the cab.
That's true yes, these features would be nice and I'll try to fit them in at some point, but they're relatively minor details compared to some of the other missing stuff so they're not yet a high priority.
I hope one of the locos is the class 37
It's quite possible, there's a screenshot of it with temporary textures in the RPS interview.
In version 1.3 you said something about adding new dmus and a loco plus carriages. What classes will these new trains be? And when will version 1.3 be released?
There's a more up-to-date plan over at the Steam discussions forum (no account required for reading). The locos will be 03 and/or 08 and/or 37 with Mk1 coaches and/or freight wagons but I'm going to release two editor updates before that. Developing the editors is taking a lot longer than I originally expected because they're technically quite complex. I shouldn't really give any dates because I've done such a poor job of estimating them in the past, but the next update is quite likely to be released next month.
salut chef, peux tu augmenter le reglage de zoom dans la cabine stp
Sure, what kind of improvement are you thinking of?
qu on puisse se reculer du tableau de bord pour mieux voir les instrument
Just more zoom? Yeah I can do that for the next update
merci chef continue comme ca ton jeu sera au top
Hey man, just wanted to say your simulator is going really great. Looking forward too all the cool features you have planned
Hey thanks for the encouragement!
pouvez vous mettre les panneaux d avertissement avant le changement de vitesse limite de troncon svp?
In reality there weren't advance warning boards for the speed limits in 1960's UK so I'm leaving them out. For more modern routes there will be advance warnings
merci parce que c est pratiquement impossible un freiner a temps lol
continuez vous a developper un mode multiplayers?
Probably not because it's difficult in many ways. I'll reconsider after DRS is complete!
dommage le coté cooperatif serait interessant comme dans trainz ou open rail
I've watched a couple of videos of Trainz, Open Rails and Run8 multiplayer. The problem is that they don't seem very fun. Train Simulator 20xx is still the most popular train sim even if it doesn't have multiplayer.
pas faux en effet mais le multi peux avoir un interet dans ca jeu
Lesj ai decouvert un mod multi sur ts 2018 dans le workshop steam
Can you share a link to that mod?
If you had the chance to design the multiplayer for a train sim, how would you do it?
https://steamcommunity.com/sharedfiles/filedetails/?id=1237192801&searchtext=mul...
je pense que pour le multiplayer, un sondage pourrait etre interessant pour recolter les idees de tous le monde
Is it possible to mod this game at all?
Not yet, but the editors will be gradually released within the next 6 months
cool une mise a jour prochainement avec des nouveautées?
Yes an update is probably going to be released next week, but it's a small one with some bugfixes and optimisations. The route editor is still not ready.
Feedback on 1.2.6 Beta:
- in my case, scenery loading stutter feels a bit more intense now; maybe I should test with hard drive caching off to check impact.
- the "sim step" parameter might be higher than 1.2.3.
- reflections "on" has more fps impact and introduces a jittery feel to motion in this build.
- have not encountered any bugs / crashes.
Thanks! I'll need to revisit the scenery loading mechanism and release another beta. The performance issues in general are something I didn't expect or really notice on my own laptop, but I'll go again through the changes I did to see if there's anything obvious there that might have an impact.
How do i make controls simple mode i forgot
It's under the "Tutorials" button in the service screen where you select Drive/Watch
thx
Will you be able to extend routes with the route editor?
Yes, you'll be able to load, edit and save again any route. If people want it, I can consider doing some kind of protection so that you can distribute a route you've done without letting others make changes to it.
Diesel Railcar Simulator is the first train sim I have purchased since way back when MS train simulator came out and this is far more enjoyable. Until this came out the available train sims on the market have had very mixed ratings but this sim is fantastic. I know you mentioned that the sim currently focused on Diesel mechanical / hydraulic for time being and that's fine (class 35 or 43 or 52 locomotives maybe?). But it would great if you managed to get diesel electric supported for this sim, it could allow DEMU class 205s for instance. Also, if diesel electric were supported, would physics support for purely electric locos (apart from track infrastructure) really be that much more work given that both are driven by traction motors?
Thanks Jakkson! Diesel-electric support will be coming eventually as soon as I get some other stuff out of the way first (the editors for instance). I'll need to research how it works in detail to model it to the same fidelity as the mechanical and hydraulic transmissions. The train editor will allow the community to add the classes you mentioned while I focus on developing the core sim.
It's true that the diesel-electrics share a lot of similarities with purely electric locos but I don't yet know to what extent. There might be some differences in the control mechanisms. The infrastructure is also a major point, not just in the 3D-modelling of the power rails or overhead electric lines, but because of how multiple electric trains drawing current from the same transformer affect each other's performance, unlike steam or diesel locos which are independent of each other.
bonjour, pensez vous rajouter le mode multijoueur prochainement?
Multiplayer is probably quite difficult to do so that it works reliably, is fun and doesn't suffer from abusive players, so I'm going to leave it out unless I figure out a way to solve all the problems easily.
pouvez vous mettre le frein d urgence en plus du frein conventionnel
Yeah, I'll add emergency brake in one of the train updates where new trains are added and physics improved
bonjour allez vous modifier les horaires? car certains sont impossible a realiser a cause du temps d attente au feu rouge
Yes, in the next update I'm going to adjust the timetables to make sure all services can be run to time.
Personally I quite like the idea of starting some services with a delay; kind of "do you best to recover time" challenge mission that adds a random element to the simulation; so I don't see them as a bug or issue.
That's true and I agree but there are some services which can't be run to time under any circumstances. The randomisation will always result in starting late or being held at a signal so long that you'll always be late at the last stop. I'm going to make sure all services can finished in time at least sometimes.
bonjour pensez vous mettre un support manette sur le jeu
Oui :) Not in the next update but in the future there will be support for gamepad/joystick
You can already use a gamepad or joystick with the help of another program, here is a guide (not written by me):
https://steamcommunity.com/sharedfiles/filedetails/?id=1347790178
Would it be possible in one of your updates to add traffic on the roads? Like cars , trucks and buses etc. The towns and roads seem a bit empty without anything moving about.
Yes, road traffic is in the plans but first I need to make the editors and improve the road layouts, so it'll probably be a very late stage feature.
An interview over at Rock, Paper, Shotgun
Do you have an idea on when version 1.3 will be released? Or is it still a while from now?
Hoping to get the beta version of the next update ready for testing by end of May but no guarantees!
bonjour envisagez vous de mettre du materiels diesel francais comme les abj ou abh metrique ou les x 2000 corse et des routes reelles?
I can only promise that I'll try to do very easy to use route and train editors for the community. There are many players from France so I hope some of them will try making real French routes and trains.
What kind of features are you planning to put in the route editor ?
At first, the bare minimum to be able to make routes similar to the ones currently in the sim: track laying, semaphore signals, distants, AWS magnets, stopping areas/markers, scenery features, timetable creation... I'll be adding more advanced features in later updates!
Sounds great
This is by a mile the most realistic of all the train sims. In regards, physics, sounds both dmu and rail sounds. Plus operation of the units themselves. I was a shed fitter on BR WR, mostly dmu's but also all the hydraulic classes from joining in the late 1960's. It doesn't get any better than this and i look forward to future development. Particularly in regards the editors, both route and scenario creation.
I just purchased this a couple of hours ago, as someone who has driven these in the early 1960's
on the Midland Region, got to say I am very impressed :O)
Hope you keep on with updates :O)
Charlie, thank you for the very generous tip! If you have any stories or comments to share in regards to the performance or operation of the units I'm all ears! I know that the brakes in the simulator are probably underpowered at low speeds because the behaviour of the cast-iron brake blocks is not simulated quite correctly.
Updates will definitely be continued barring any force majeure! The progress might be a bit slow because of the genuine complexity of all the stuff involved.
Thanks IKB, the route editor is currently in the works and I'm excited to see what people can do with it once it's ready! I'd be interested in any knowledge that could be used for improving the realism of the simulator, based on your experience working with the DMUs!
Do you have to activate the game on steam to receive future updates or not?
No need to activate on Steam, updates will be continued here as well. In fact, the next update will be later today.
Glad to see it out on steam. Congrats on the release!
Thanks!
Just a reminder: if you buy/bought the sim from here, you don't need to buy it again on Steam. Just log in and go to the download page, then click the "Get Steam key" button.
Go to the download page of what exactly?
The game's download page: at the top of the page there should be a link saying "You own this game" and a Download button.
if a price of something differs by more than 10℅ by currency or region the sale is blocked to gift. Along with stopping people buying things and putting in thier inventory.. I gather its more against the grey area market of cheaper country pricing sold for profit elsewhere.. But its really stopped me gifting games to good friends overseas..
Thanks for the info..ill buy from here :)
A news link from a while ago about it
https://www.kotaku.com.au/2017/05/steam-users-are-concerned-about-valves-new-gif...
Would it be possible to purchase steam keys from you at all? Steams recent regional changes would make using keys to gift so much easier
Hi Overland, if you purchase the game here you get one Steam key. I'm not sure if the key is affected by the regional changes (what changes are those?)
This game is awesome, I hope that will be able to have a steam key on march 5th :) I will make a presentation on my youtube channel for my french community. Congrat !
Thank you! I just added a batch of Steam keys to the system. You can get yours by going to the download page and clicking "Get Steam key". The key can be activated already but the download on Steam won't work until the official release on Monday.
Excellent, the steam release will be the same as this one ? Just a few notes after playing with your game : In some trains the speed gauge is not accurate. Then, we have to use the speed helper (ui at the right) to get our real speed. On the route schema on the right it's difficult to evaluate distance and size of station too. Awesome game I hope we could see passengers go up and down the train :)
Yes, the Steam and Itch versions are identical.
Thanks for the notes! Yeah, the speedometers can be somewhat inaccurate but luckily the speed they show is usually a bit more than the actual speed, so you won't overspeed if you follow them. The route schema is that way by design so it wouldn't make things too easy. You should only use it to get an idea what is coming next and then look out of the window! :) Moving passengers are planned for one of the later updates.
Please post a link to your video here or to the Steam community if you can, I'd love to watch the video once it's ready!
I will, but the video will be in french :)
No problem! It'll be useful to all French-speaking users. Everything doesn't have to be in English, there's already one video in German in the Steam community hub. Besides, I can understand French to some extent :)
Firstly I see DRS appearing on my 'coming soon' list on Steam - woot!
Secondly - is there any way to see a map of the world that DRS is set-in? I like to have an idea of where I am/going - even if it's just a JPG - just so I can see where everything is in relation to everywhere else??
Also loving the new shader/style - tho it's had a bit of an effect on performance - new PC looms I guess!!
Yes, DRS is finally coming to Steam! I'll arrange the keys for itch owners after the official release.
The new version has a map button at the bottom of the service selection screen, did you notice? It's easy to miss though! There's no map during the actual run yet, this is planned for the next update.
Motion blur is perhaps the single most demanding graphical effect. Does it help if you turn that off? You might also get better performance by using the second best quality option, but still enabling some of the additional effects, rather than using the best quality and disabling some effects. The sim is nowhere near fully optimised yet so hopefully you don't need to get any new hardware!
Maps found - MUCH happier when I know where I'm going!!
One small issue - the 'tutorial' function which suggests what to press seems to be less useful than it was in earlier releases? I'd disabled it for areas I was comfortable driving but I ran a scenario today which ended in a terminus and following the on-screen instructions led me to crash into the buffers!
It also gets confused in some stations - you stop and it keeps suggesting you apply/release the brakes over and over?
I'm ALMOST grown-out of it but I imagine new players may be confused?
The key tutorial is the same as in the earlier version. It does occasionally instruct you to accelerate right before a terminus buffer stop so there's still room for improvement! For a funny example of this, see GrayStillPlays' Let's play video (he's playing version 1.0). The reason why the tutorial suggests fiddling with the brake at stations is because it's trying to match 15 inches of vacuum which is the standard for keeping the train still. The vacuum gauge works with some delay, especially in longer trains, which is why you see the needle dropping occasionally below 15in even though the brake valve is lapped. You're right though, it's confusing for a beginner and I'm still going to fine tune it in some of the future updates!
It's super-useful to have that guide - esp as the game has the 'score' aspect for best driving practices!!
It also maybe distracts people a BIT from learning trains properly - I had to force myself to turn-it-off - I believe remapping is possible so maybe I need to remap to TS settings to avoid having to think so hard? :)
Hey, congratulations for the launch of version 1.2, great improvements on atmosphere and sounds (they make it even more immersive now).
I saw your post regarding the graphical effects on performance and wanted to add this from my findings: with "Good quality" preset and "Reflections" turned "off" I get fireflies on the edges of the passenger seats, sometimes with flashing white squares around them. Same effect is visible from the helicopter cameras and also on the incoming trains (from the opposite direction). Frame rate tanks a bit when I rotate my camera to look at them specifically (60 to 40-30). I'm attaching an image in case my description is lacking.
I know you mentioned you haven't optimised it yet, hoping this will be of some aid when you get there. All the best ! :D
Thanks! I've sometimes noticed the fireflys on my own machine as well, but not recently, so I thought the issue had somehow resolved itself, but apparently not. It's probably the bloom effect? There might some very small or degenerate triangles in the places where the fireflys occur, will need to investigate and come up with a fix to the next update.
Did a test with "Bloom" setting "Off" and the artefacts are still there for me, maybe there are some inverted normals or overlaps in the mesh. LE: They go away if I turn High Dynamic Range "Off" when having Reflections disabled.
Thanks, I tried the same and indeed, it's not the bloom. They also go away if I enable TAA or disable AO, so it must be a combination of the post effects and how they handle triangle or normal vector edge cases.